Nanjing SiSiB Silicones Co., Ltd.
Nanjing SiSiB Silicones Co., Ltd.
POWSIL™-99900
POWSIL™-99900

Hydrophilic Silicone Softener

POWSIL™-99900 is a hydrophilic silicone fluid based on a new linear block-copolymer platform comprising polyether and quaternary functional silicone copolymer. It delivers a hydrophilic, voluminous, and silky natural hand feel with lower dosage.

POWSIL™-99900

Introduction


POWSIL™-99900 is a new hydrophilic silicone fluid based on new linear block-copolymer platform comprising polyether & quaternary functional silicone copolymer. It can use lower dosage than traditional silicone softeners to deliver a hydrophilic, voluminous and silky natural hand feel.


Benefits


  • Provides excellent dispersion & penetration properties for fibers;


  • Imparts natural voluminous and silky natural hand feel;


  • Deeply penetrates into fibers to impart internal softness;


  • Durable softness to laundering;


  • Good hydrophilicity;


  • Less yellowing;


  • Stable formulations;


  • Suitable for both padding and exhaustion finish process;


  • Non or less oil spots while applying emulsions on fabric;


  • Excellent affinity on all types of textile.


Typical Physical Properties


Appearance

Yellowish Viscous Liquid

Solid Contents (wt%)

94

Viscosity (25°C, cP)

3000-10000

pH (25°C)

5.0-7.0

Density ( 25°C, g/ml)

0.82

Ionic

Slightly Cationic

D4

<1000 ppm

D5

<1000 ppm

D6

<1000 ppm


Application


POWSIL™-99900 cannot be applied directly on fabrics. It should be emulsified before applying in the textile finish process.


  • Formulation

Composition

% wt

POWSIL™-99900

23.5

TDE-6 or AEO-6

6.0

TDE-9 or AEO-9

6.0

Acetic Acid

0.3

Water-1

30.0

Water-2

34.2

Preservative if necessary

~

- TDE-6: Tridecyl Alcohol Ethoxylated with 6 EO.

- AEO-6: Fatty alcohol Ethoxylated with 6 EO.

- TDE-9: Tridecyl Alcohol Ethoxylated with 9 EO.

- AEO-9: Fatty alcohol Ethoxylated with 9 EO.


  • Procedures

1) Stir POWSIL™-99900 in container to make it homogeneous before taking out for use.

2) Charge POWSIL™-99900 and emulsifiers into a mixer, then stir the mixture at moderate speed for about 10 min till fully homogeneous.

3) Charge water-1 once and continue to stir at 300-600 rpm for 30 min (Water-1 must be added once to avoid forming hard gel).

4) Add water-2 at moderate speed and then acidic water into above mixture. Continue to stir at 300-500 rpm for 20 min.

5) Clear micro-emulsion with some foam should be obtained at end of this procedure.

6) Filter before packing, if necessary.


The Example of Application of 23.5% POWSIL™-99900 Microemulsion


23.5% of POWSIL™-99900 can be used as received or pre-diluted with water before applying. Optimum treatments are dependent on the required softness of the fabric and yarn after dyeing and finishing.


  • 1. Pad-dry-cure process

Dosage

10~20g/l for light fabric or

25-40g/l for heavy fabric

pH

5.0 ~ 7.0

Dry/Cure

120 ºC~170 ºC for 1-3min

Temp.

Ambient temperature


  • 2. Exhaustion process

Dosage

1.0-3.0% (o.w.f)

Liquor ratio

1/10-1/20

pH

5.0 ~ 7.0

Temp.

Ambient temperature

Time

10-30 min

Drying

100~130ºC for 3-5 min


  • 3. Garment washing process

Dosage

1.0-3.0% (o.w.f)

Temp.

Ambient temperature

Time

10-30 min

Drying

100~130 ºC for 3-5 min


Packing and Storage


To ensure that the product quality is maintained, the container should be tightly sealed when not in use. It should be stored at normal room temperature, preventing prolonged exposure to extreme heat and cold conditions, which may cause product separation. POWSIL™-99900 tends to be sediment on bottom during storage period. If the product is separated, stir the contents to homogeneous. If the product is frozen, thaw it at warm condition and stir after thawed.


Notes


All information in the leaflet is based on our present knowledge and experience. We reserve the right to make any changes according to technological progress or further developments. Performance of the product described herein should be verified by testing.


We specifically disclaim any other express or implied warranty of fitness for a particular purpose or merchantability. We disclaim liability for any incidental or consequential damages.


March 2024 | Technical Data Sheet | Edition SS


Please send all technical questions concerning quality and product safety to: support@SiSiB.com.

Sample? Literature? Pricing? Technical?
Recommended Silicone Softener Products
POWSIL™-99900