
POWSIL™-59802 is a super soft and slick textile softener concentrate, a micro-emulsion of amino-modified silicone polymer. It is widely used for all kinds of textile fabrics, imparting durable elasticity, softness, lubricity, sewability, smoothness, and shine finish.
POWSIL-59802 is a super soft and slick textile softener concentrate. It is a micro-emulsion of amino-modified silicone polymer which is used for softening textiles. It is widely used for all kinds of textile fabrics and imparts durable elasticity, softness, lubricity, sew-ability, smoothness and shine finish.
Stable micro-emulsion concentrate;
Dilute with water and mild stirring to any lower grades. No acid and emulsifiers are needed. The dilution would get a clear and stable clear micro-emulsion;
Imparts good affinity to various fabrics;
Imparts remarkable slickness and softness to various fabrics;
Imparts rebounce or elastomeric property to various fabrics;
Imparts low-yellowing to various fabrics;
Provides the competitive cost-performance ratio.
Property | Value |
Physical Form | Liquid |
Appearance | Transparent with bluish |
Solid Contents (wt%) | 59.0~61.0 |
Viscosity (25°C,cps) | <1000 cst |
pH (25°C) | 4.5~6.5 |
Flash Point (oC) | >100 |
Diluents | Water |
Ionic | Nonionic to Slightly cationic |
POWSIL-59802 can be diluted with water and mild stirring to any lower grades. No additional emulsifier or acid is required.
Micro-emulsion for 30.0% of POWSIL-59802
1. Formulation:
POWSIL-59802: | 30% |
Water: | 70% |
2. Dilution Procedures:
1) Charge water into a tank;
2) Add POWSIL-59802 into the tank;
3) Start to stir with a mixer or a hand-stick. Continue to stir until all POWSIL-59802 is well dispersed.
4) Stop stirring and stand for a while. A clear micro-emulsion is formed.
POWSIL-59802 can be used as received or pre-diluted with water before applying. The desirable usages are dependent on the required softness of the fabric and yarn after dyeing and rinsing.
1. Pad-dry-cure process
Dosage: | 5-10g/l for light fabric or 10-20g/l for heavy fabric |
pH: | 5.0-7.0 |
Temp.: | Ambient temperature |
Dry/Cure: | 120-170oC for 1-3 min |
2. Exhaustion process
Dosage: | 0.5-1.0% (o. w.f.) on light fabric & 1.0-2.0% on heavy fabric |
Liquor ratio: | 1/10 -1/20 |
pH: | 5.0-7.0 |
Temp.: | Ambient temperature |
Time: | 10-30 min |
Spinning & Drying: | 100-170ºC for 1-3 min |
3. Garment washing process
Dosage: | 0.5-1.0% on the weight of garment |
Temp.: | Ambient temperature |
Time: | 30-60 min |
Spinning & Drying: | 100-130ºC for 3-5 min |
To ensure that the product quality is maintained, the container should be tightly sealed when not in use. It should be stored at normal room temperature, preventing prolonged exposure to extreme heat and cold conditions, which may cause product separation. POWSIL-59802 tends to be sediment on bottom during storage period. If the product is separated, stir the contents to homogeneous. If the product is frozen, thaw it at warm condition and stir after thawed.
POWSIL-59802 is packaged in net weight 50Kg or 120Kg plastic drum.
All information in the leaflet is based on our present knowledge and experience. We reserve the right to make any changes according to technological progress or further developments. Performance of the product described herein should be verified by testing.
We specifically disclaim any other express or implied warranty of fitness for a particular purpose or merchantability. We disclaim liability for any incidental or consequential damages.
Please send all technical questions concerning quality and product safety to: support@SiSiB.com.