POWSIL-59360 is a milky emulsion with big particle sizes & imparts a super slick & soft feeling to various fabrics.
It contains a revolutionary silicone molecule that is able to deliver consistent sio2 hydrophilic property to most types of textile fiber or fabric and be used in smaller amounts than other silicone microemulsion softeners. It is very stable in ordinary textile finish process without causing the formation of oil-spots on fabric.
Property | Value |
Physical Form | Liquid state |
Appearance | Milky white |
Solid Contents (wt%) | 30.0-32.0 |
PH(25°C) | 4.0-6.0 |
Flash Point (°C) | >100 |
Diluents | Water & Alcohol |
Gravity ( 25°C) | 0.96-1.06 |
Ionic | Nonionic |
POWSIL-59360 can be readily diluted in water. No additional emulsifying is required to directly apply it in textile finish process.
POWSIL-59360 silicone softening agent can be used as received or pre-diluted with water before applying. Optimum treatments are dependent on the required softness of the fabric and yarn after dyeing and rinsing.
Pad-dry-cure process
Dosage: | 10~20g/L for light fabric or 25-50 g/L for heavy fabric |
PH: | 5.0-7.0 |
Temp.: | Ambient temperature |
Dry/Cure: | 120-170 ºC for1-3min |
Exhaustion process
Dosage: | 1.0-2.0% (o.w.f.) on light fabric & 2.5-5.0 on heavy fabric |
Liquor ratio: | 1/10-1/20 |
PH: | 5.0-7.0 |
Temp.: | Ambient temperature |
Time: | 15-30 min |
Spinning & Drying: | 100-170 ºC for 1-3 min |
Garment washing process
Dosage: | 1.0-3.0% (o.w.f.) |
Temp.: | Ambient temperature |
Time: | 15-30 min |
Spinning & Drying: | 100-170 ºC for 1-3 min |
Stripping:
POWSIL-59360 by SiSiB, a reliable custom silicone product supplier, can be stripped off fabric. The stripping formulation is as follows:
NaOH: | 5 g/L |
LABS(30%): | 2-5% |
Add water and NaOH onto fabric tank and then heat to 100℃ for 60 min. Then rinse fabric with acidic water and water.
To ensure that the product quality is maintained, the container should be tightly sealed when not in use. It should be stored at normal room temperature, preventing prolonged exposure to extreme heat and cold conditions, which may cause product separation. POWSIL-59360 tends to be sediment on bottom during storage period. If the product is separated, stir the contents to homogeneous. If the product is frozen, thaw it at warm condition and stir after thawed.
POWSIL-59360 is packaged in net weight 120Kg plastic drum.