Name: POWSIL-99050
Brand: Nanjing SiSiB Silicones Co., Ltd.
Price: 100 USD

Technical Data

Appearance	Light yellowish translucent liquid
Silicone Content (wt%)	~100
D4 (Octamethylcyclotetrasiloxane)	<1,000 ppm
D5 (Decamethylcyclopentasiloxane)	<1,000 ppm
Viscosity (25°C, cps)	~1,000
Specific gravity (25 ºC)	0.98
Refractive Index (n D²⁵)	1.406
Amine equivalent (ml 1N HCI/g)	~0.30

Application

A typical formulation & procedure (recommended)

Raw Materials	Wt%	Remarks
POWSIL-99050	15.0	Silicone oil
Lutensol TO 7	5.66	Emulsifier from BASF
Lutensol TO8	2.10	Emulsifier from BASF
Butylcarbitol	2.75	Co-solvent
	Also called as diethylene glycol monobutyl ether
Initial water	10.0
Acetic acid	0.25
Final water	Balance to 100%
Biocide	0.02

Charge POWSIL-99050 silicone fabric softener, T07 & TO8 and Butyl Carbitol into a mixing tank. And start to mix for 15-20 min;

Premix initial water and acetic acid to form an acidic solution. Charge the solution slowly into the soft grease. The charging should take about 30 minutes. After all of acidic solution has been added, continue to mix the content for 15 min to get a clear grease;

Reduce the agitation speed after ¾ of the final water has been charged. Continue to mix another 15 min after all the water has been charged.

To ensure that the high quality silicone product is maintained, the container should be tightly sealed when not in use.
It should be stored at normal room temperature, preventing prolonged exposure to extreme heat and cold conditions, which may cause product separation. If the product is separated, stir the contents. If the product is frozen, thaw it at warm condition and stir after thawed.

POWSIL-99050 Technical Data Sheet